1 3/8" x 50' Colored Half-Round Body Side Molding for Cars, Trucks, and SUVs (Super Black)

Application Procedures 1. The body of the vehicle must be clean and dry to achieve the best adhesion. Clean with 70% Isopropyl Alcohol. 2. The pressure sensitive adhesive on the molding must not be contaminated during the application. 3. The molding must be applied to achieve complete contact (bond) of the adhesive to the vehicle. (i.e. maximum wet-out) 4. Molding adhesion is best when applied at temperatures above 80 degrees Fahrenheit to 110 degrees Fahrenheit. 5. During cold weather, warm molding with a heat gun or heat lamp. Be careful not to damage the surface. 6. Cut molding with an anvil type cutter to proper length. 7. Allow 24 hours for molding to set.

• Color Trim 1 3/8" Half Round Body Side Molding
• This Half Round Body Side Molding comes in rolls of 24, 50, and 100 feet.
• Color Coded to match your car's factory Paint Color; Match your Paint Code to the Above Chart
• ***IF you aren't sure, SEND US A MESSAGE with your car's paint code, and we will MATCH FOR YOU***
• This Half Round Wheel Well Molding can be used in vehicles, furniture, spas, tubs and almost any unfinished edge. It comes with a 3M Acrylic Foam Tape for easy, quick installation.