C2G HDBaseT Dual 4K HDMI Extender + USB C, 3.5mm and USB B to A over Cat - HDMI Wall Plate to Receiver Box - 4K 60Hz

<p>The Dual 4K HDMI® HDBaseT + USB-C®, 3.5mm, and USB-B to A over Cat Extender Wall Plate Transmitter to Audio De-Embedding Box Receiver - 4K 60Hz allows HDMI or USB-C audio/video sources to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling.</p> <p>This HDMI HDBaseT receiver is HDCP 2.2 compliant, making sure that the connection between the source and display is secure. Automatic switching is supported, connecting to the last active source. Additional analog audio output pass-through allows for audio distribution. High-speed USB 2.0 pass through is supported over HDBaseT up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With PoH (Power Over HDBaseT) support, the receiver can send power to the transmitter, so no additional power adapter is required, allowing for greater flexibility in installations. Advanced users can control the transmitter via the RS232 port on the receiver.</p> <p>Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.</p> <p>Note: Extend 4K up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K up to 130 feet using a Cat6a cable. Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high frequency signaling cables, or in high EMI/RFI environments. For best performance use an HDBaseT Certified Cat6a Patch Cable.</p> <ul><li>Dual HDMI HDBaseT + USB-C, 3.5mm and USB-B to USB-A over Cat Extender Wall Plate Transmitter</li><li>Audio De-Embedding Box Receiver</li><li>Extend 4K at 60Hz (4:2:0) up to 130ft and 1080p at 60Hz up to 230ft with Cat 6a cable</li><li>Extend 4K at 60Hz (4:2:0) up to 115ft and 1080p at 60Hz up to 200ft with Cat 5e/6 cable</li><li>HDCP 2.2 compliant</li><li>Additional analog audio input pass-through allows for audio distribution to the receiver side</li><li>The transmitter supports automatic switching</li><li>The transmitter supports firmware upgrade and device control via the Micro USB port</li><li>Supports USB 2.0 pass through over HDBT up to 230ft, connecting up to 4 USB devices to the receiver</li><li>C2G 5 Year Warranty</li></ul>

• C2G
• VGA
• TO HDMI DONGLE